Sunday, March 13, 2011

Lighting: Part II

And now Lighting Part II is complete! This one was a little more complicated. We had a challenge from the get-go because the build-out of the window in the new kitchen wall (and thus the extension of the counter into the dining area) meant we needed to move the dining room table out from under the center of the existing (wack-a-doo) light fixture. As the dining room lighting was set up with the previous wall in place, this meant that we'd need to either hire an electrician to rewire the thing, or find a light fixture that didn't depend on obvious centering to work in the space. As bonafide DIY-ers now, we clearly opted for the latter. Initially we thought we'd go with something big, and maybe flush mounted to the ceiling, taking up so much space that the true center wouldn't matter as much. But we couldn't really see something that big working in our dining/living area, so back to the drawing board. When we went to Home Depot earlier, we looked at several options that we thought could work, and ultimately landed on something that itself was off-center and could be mounted perpendicularly to the table and dining wall, such that the true center, again, wouldn't be as, well, central. Again, I have to give you the "Before" image as a recollection of where this all started...

(yes... it all began with this stunning basket-o-flowers chandelier)
The new light fixture is so different, and certainly light years more modern. We're having a hard time deciding if we will stick with it, but we're leaning toward yes, at least for now. I think making the leap from 1961 to 2011 overnight with one single home accessory is just a little bit of a jolt so we need to let it set in more! Anyway... here it is from installation to lit:

(basket gone!)
(putting up the bulbs and shades was tricky, actually)
(one up, three to go)
(much better, right?!)
(and just to further prove Dave's handy skills... lit!)
 

1 comment:

Eric said...

You've done it again - bravo!